|
|
 |
Hydraulic folding Discordon: DXRV, DXRVL
For high horsepower tractors
?For equally efficient labour, time and fuel saving advantages, the Gregoire-Besson Discordon has it all-in-one.
A new addition to the Discordon’s effectiveness comes in the form of an interchangeable system - allowing operators to swap from standard ripper to subsoil leg, capable of working at depths of over 40cm.
The DXRV/DXRVL has a working width of 4.20 to 7.20 m and requires 220 to 600 horse power respectively.
Four in one system
Front discs chop and mix, a double row of tines lifts and shatters the soil pan, rear discs turn and level the soil with a rear Emopak roller consolidating to limit evaporation. That’s four cultivation tasks completed in one pass.
The gang angle is adjusted mechanically or hydraulically.
The tines are protected by shear bolts or hydraulic auto reset. The working depth is controlled hydraulically via a parallelogram.
The Discordon can be equipped with a rear roller up to 900mm or an EMOPAK 630mm or 745mm.
Great stability
The drawbar is equipped with a hydraulic cylinder to increase the pressure on the tractor to reduce the draft. This cylinder is linked to a rubber shock absorber to ensure a regular working depth and give a comfortable ride.
Large choice of options
For different working conditions a large choice of discs and spacing are available. A choice of rear rollers is also available.
Other options include an autolube system, hydraulic brake system and low pressure wheels.
Technical Details
|
DXRV II |
DXRV HD |
DXRVL HD |
| Working width (m) |
4.20 - 4.70- 5.20 |
5.70 - 6.20 - 6.70 - 7.20 |
5.70 - 6.20 |
| Frame section (mm) |
250 x 150 x 8 |
250 x 150 x 8 |
250 x 150 x 8 |
| 2nd frame section |
150 x 100 x 8 |
150 x 100 x 8 |
150 x 100 x 8 |
| Number of discs |
32, 36, 44 |
44, 48, 52,56 |
44 - 48 |
| Number of tines |
7, 9, 11 |
11, 13,15 |
11 - 13 |
| Discs spacing |
230/270 |
230/270 |
270 |
| Discs Diameter (mm) |
660 |
660 |
710 |
| Discs shaft size |
40 |
40 |
50 |
| Hub |
80 mm angular |
100 mm angular |
100 mm angular |
| Safety device |
shear bolt, non-stop hydraulic |
shear bolt, non-stop hydraulic |
shear bolt, non-stop hydraulic |
| Angle adjustment |
Mechanic or hydraulic |
Mechanic or hydraulic |
Mechanic or hydraulic |
| Linkage |
Reinforced ball ring or rear linkage Cat II or III |
Reinforced ball ring or rear linkage Cat II or III |
Reinforced ball ring or rear linkage Cat II or III |
| Roller |
roller up to 900mm or an EMOPAK 630mm or 745mm |
roller up to 900mm or an EMOPAK 630mm or 745mm |
roller up to 900mm or an EMOPAK 630mm or 745mm |
| Wheel |
15 R 22,5 |
18 R 22,5 |
18 R 22,5 |
| Options |
Discs, hydraulic angle, hydraulic brake system... |
Discs, hydraulic angle, hydraulic brake system... |
Discs, hydraulic angle, hydraulic brake system... |
| Weight (kg) |
8200 - 10200 |
10200 - 14000 |
11000 - 13750 |
|
