Download Leaflet (coming soon)
Print this page
Technical Details

Semi-mounted, reversible ploughs: SPER7, SPERW7

light mounted reversible plough

Simple performance

These ploughs have a 150x150 mm main beam expanding to 200 x 150 mm after the headstock. They have different security systems and clearances available.

Each model is suitable for 70 to 220 horsepower tractors.

Tight turning circle

The articulated headstock provides a 110 degree turning circle. The turnover at the headland is controlled via 2 rams.

SPER7 - manual working width adjustment

On the SPER7 the adjustment of the working width is performed manually with 6 positions (12, 14, 16, 18, 20 and 22 inches)

SPERW7 - variable working width

The SPERW7 allows the working width to be adjusted hydraulically, on the move from the cab, from 12 to 20 inches. It can be used on any tractor with any wheel width.

Large choice of options

As on other ploughs in the Grégoire Besson range there is a wide choice of wheels (depth adjusting, transporting, combined etc.) as well as mouldboards and skimmers.

Technical Details

Type Semi-pounted plough in land carriage SPER7 + variable width (hydraulic)
Number of Furrows 5, 6, 7, 8 5, 6, 7, 8
Frame section (mm) 150 x 150 and 200 x 150 150 x 150 and 200 x 150
Underbeam clearance (cm) 73-77 73-77
Point to point (cm) 100 100
Safety device Shearbolt, Non-stop mechanic, Non-stop hydraulic Shearbolt, Non-stop mechanic, Non-stop hydraulic
1st Furrow adjustment (1st furrow width) Manual adjust/hydraulic Manual adjust/hydraulic
Furrow alignment Mechanical/hydraulic Mechanical/hydraulic
Ind hydraulic 1st furrow alignment Independent Independent
Automatic hydraulic 1st furrow adjustment Automatic, with reverse controlling Automatic, with reverse controlling
Furrow width 5 positions manual Continuous adjusting during operating (hydraulic)
Wheel Choice: lateral, rear, combined Choice: lateral, rear, combined
Turnover From above From above
Options The choice of mouldboards and skimmers The choice of mouldboards and skimmers