Download Leaflet (coming soon)
Print this page
Technical Details

Semi-mounted, reversible, compact ploughs with single wheel: SPL9, SPLW9

light mounted reversible plough

Ease of handling

Single wheel ploughs for 130 - 400 horse power tractors are popular, because there is less loading on the tractor hitch.

For use on land and in furrow

These ploughs are capable of working in furrow when the ground is wet

Tight turning circle

The articulated headstock provides a 110 degree turning circle. The turnover at the headland is controlled via a rack and pinion system.

Configuration

The 180 x 180 mm reinforced beam has a unique, patented "Z" profile to bring the wheel closer to the plough.
This improves stability during operation and transport and increases manouverability at headlands. Wide wheels (over 1.10 m diameter) , are available for heavy soil conditions.

SPL9 - manual working width adjustment

On the SPL9 the adjustment of the working width is performed manually with 6 positions (12, 14, 16, 18, 20 and 22 inches)

SPLW9 - variable working width

The SPLW9 allows the working width to be adjusted hydraulically, on the move from the cab, from 12 to 20 inches. It can be used on any tractor with any wheel width.

Large choice of options

As on other ploughs in the Grégoire Besson range there is a wide choice of wheels (depth adjusting, transporting, combined etc.) as well as mouldboards and skimmers.

Technical Details

SPL9 SPLW9
Type Single wheel plough Single wheel plough with variable width
Number of Furrow 4, 5, 6, 7, 8, 9 4, 5, 6, 7, 8
Frame section (mm) 180 x 180 with sidetracking 180 x 180 with sidetracking
Underbeam clearance (cm) 71-76-81 71-76-81
Point to point (cm) 100-114 100-114
Safety device Shearbolt, Non-stop mechanic, Non-stop hydraulic Shearbolt, Non-stop mechanic, Non-stop hydraulic
1st Furrow adjustment (1st furrow width) Manual adjust/hydraulic Manual adjust/hydraulic
Furrow alignment Mechanical/hydraulic Mechanical/hydraulic
Ind hydraulic 1st furrow alignment Independent Independent
Automatic hydraulic 1st furrow adjustment Automatic, with reverse controlling Automatic, with reverse controlling
Furrow width 5 positions manual Continuous adjusting during operating (hydraulic)
Wheel Choice: lateral, rear, combined Choice: lateral, rear, combined
Turnover From above From above
Options The choice of mouldboards and skimmers The choice of mouldboards and skimmers