The Crossland Range - A new generation of tined cultivator

The expertise and experience acquired by Grégoire-Besson in the design and manufacture of tillage equipment for 200 years allowed its engineers to develop a range of tined cultivators which are able to adapt to all conditions.

Multipurpose

• Direct into stubble.
• Seedbed preparation.
• Ploughing.

Versatile

• Choice of rear accessories: triple following harrow, crumbler roller, double crumbler roller, Impak roller.
• Choice of leveling accessories: leveling discs, blades crossboard

Effective

• Ground clearance: up 750mm Frame, 800mm between beams.
• Works well in the presence of large amounts of plant residues.
• Mixing, grading, distribution of straw.

Tough, Enduring

• Opportunity to work more than 25 cm deep.
• Ability to work in folded fashion (2230 and 2306 series).
• Pivot points fitted with bushes and greaseable (TP type).

Handy

• Transport width: 3.00 m

Spacing 230mm

• Crumbling surface.
• Full shatter at depth.
• All the ground moved.
• Even mix of trash.
• Best quality finish.
• Less wear.

Tine Eurochisel® 2nd generation series

• Moulded leg.
• Profile "Edge on".
• Flat plate to hold the tine tight to the frame.
• Arrangement of the tines to reduce the tensile strength.
• Optimization of earth flow / straw through the clearance between beam 800 mm.
• Good maintenance of the wearing parts.
• Variable clearance according 3 positions built between 700 and 750 mm
• Security spring of 450 kg at the tip
• Clearance of advanced 34 cm
• Cast parts: lighter, more robust, more ergonomic
• Ergonomic: all nuts are prevented from rotating (only 1 spanner)
• Lower nut fixed in the tine to protect it from wear.

See all our references on the site wear parts Grégoire-Besson:
Tine bolt mounting
Tine mount Quick Change

Technical Details

1230 1306 2230 2306 3600 4000 4600
Number of tines 13 > 15 10 19 > 23 16 > 18 23 > 25 19 > 23 27 > 35
Working width (m) 3.00 > 3.45 3.10 4.40 > 5.30 4.90 > 5.50 5.30 > 5.75 4.40 > 5.30 6.20 > 8.05
Transport width (m) 3.00 > 3.50 3.00 3.00 3.00 3.00 3.00 3.00
Weight (kg) 1350 > 1500 1350 > 1500 2200 > 2550 2100 > 2200 6040 > 6190 5300 > 6050 7000 > 8000
Horsepower 110 > 120 110 > 120 150 > 185 170 > 185 185 > 200 150 > 185 215 > 280